FuranFlex RWV has been specially developed to cater for Solid Fuel appliances and solid fuel open fires." + "FuranFlex RWV is suitable for all DFE type gas fires. FuranFlex RWV has been tested to 1000°C.
FuranFlex RWV has been tested by many European Test Houses and by BSRIA and is certified by BBA in the UK.
FuranFlex RWV is the only composite chimney lining to have been tested and approved to the relevant British Standards and be listed by HETAS.
FuranFlex RWV has been used on many listed properties and thatched properties to bring chimneys safely back into use. The liner is installed into the chimney as a flat flexible hose, inflated with air at only 0.1-0.2Bar reducing any stress on the existing structure. The liner is then “steamed”, this process begins a reaction in the resin and once the resin reaches 100° Celsius it sets as hard as steel. Once this reaction has taken place the liner is cured and ready to use.
FuranFlex RWV chimney linings has been used for many years in 27 European Countries and 2,000 metres have been successfully installed in the UK over the last 24 months. Only factory trained and accredited engineers are allowed to install FuranFlex to ensure high standards of installation are maintained.
FuranFlex RWV is less than 4mm thick and can be installed freestanding inside the chimney or as the lining it can mould to take the shape of the existing chimney to maximise the cross sectional area of the flue, reducing the need to fit chimney fans saving time, money and maintenance costs.
FuranFlex RWV is available in diameters from 80mm to 1000mm and in one piece lengths up to 80metres long.
FuranFlex Chimney Linings are usually installed in one day and the appliances can be commissioned immediately after the lining is “cured”.
FuranFlex RWV carries a manufacturer’s 25 year guarantee in addition to a unique 25 insurance backed guarantee.